Operating voltage range: DC 11.0-18.0 Volt
Four Outputs Max. Charge Power: 320Watts (4 x 80Watts)
Four Outputs Max. Discharge Power: 40Watts (4 x 10Watts)
Charge Current Range: 0.1-6.0A
Discharge Current Range: 0.1-2.0A
Current Drain for Balancing Li-Po/Ion/Fe: 300mA/cell
Li-ion/Fe/Polymer Cell Count: 1-6cells
NiCd/NiMH battery Cell Count: 1-15cells
Pb Battery Voltage: 2-20V
Net Weight: 1130g
Dimension: 225.4 x 158.6 x 62.4mm
SKYRC Quattro B6 employs the circuit that features four totally independent but identical power outputs which are powered 80 watts each. Total powers are 320 watts. As a result , it can charge or discharge up to 4 packs of 15 cells of NiCd/NiMH or 4 packs of 6 series of lithium batteries simultaneously. Quattro B6 has four individual cell voltage balancer at each outputs, so it does not required any balancer separately when charging lithium batteries (LiPo/LiIon/LiFe) for voltage balancing.
The twin-fan cooling system is so smart and efficiently. The fan speed is controlled by internal temperature sensor.
SKYRC Quattro B6 allows you to plug 4 batteries into one charger simultaneously, and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. To top of it, the batteries being charged do not even need to have the same configuration. You can connect different chemistry?Ni-MH/Ni-CD/LiPo/LiFe?batteries into any of the charging ports. No more staying up late for charging batteries.
Optimized operating software
iMAX Quattro B6 features the so-called AUTO function that set the feeding current during the process of charging or discharging. Especially for Lithium batteries, it can prevent the overcharging which may lead to an explosion due to the user`s fault. It can disconnect the circuit automatically and alarm once detecting any malfunction. All the programs of this product were controlled through two way linkage and communication, to achieve the maximum safety and minimize the trouble. All the settings can be configured by users!
Internal independent lithium battery balancer
iMAX Quattro B6 employs an individual-cell-voltage balancer. It isn`t necessary to connect an external balancer for balance charging.
Balancing individual cells battery discharging
During the process of discharging, iMAX Quattro B6 can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.
Adaptable to various type of lithium battery
IMAX Quattro B6 is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.
Processing time limit
You can also limit the maximum process time to avoid any possible defect.
The maximum five batteries` data can be stored for users` convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.
1 to 5 cyclic and continuous process of charge > discharge or discharge > charge is operable for battery refreshing and balancing to stimulate the battery`s activity.
Fast and storage mode of lithium battery
Purposes to charge Lithium battery varies, `fast` charge reduce the duration of charging, whereas `store` state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery.
Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery`s voltage exceeds the threshold, the process will be terminated automatically.
Automatic charging current limit
You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the `AUTO` charging mode.
The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically when you set the maximum value.
The battery`s internal chemical reaction will cause the temperature of the battery to rise. If the temperature limit is reached, the process will be terminated. * This function is available by connecting optional temperature probe, which is not included in the package.